Youth Fans 48" 3 Blade Flush Mount Indoor Ceiling Fan - Blades and Light Kit Included
- Blades (3)
- (1) Incandescent Candelabra (E12) bulb included
- Light Kit
- 30 Year Limited Warranty
- Pull chain control
- Blade Span: 48"
- Number of Blades: 3
- Blade Pitch: 15°
- Blades Included: Yes
- Amperage: 0.5 A
- Motor Type: AC Induction
- 153mm x 12mm
- Reversible Motor: Yes
- RPM (High): 200
- Voltage: 120 V
Sloped Ceiling Specifications:
- For ceilings with slope from 35° to 45°, use the 45AD angled ceiling adapter
High or Low Ceiling Specifications:
- The Tiger Shark is designed for installation on standard 8 to 9 foot ceilings. If your ceiling is higher, you'll need to purchase an additional downrod. The rule of thumb is that ceiling fans should have a minimum of 7 feet and a maximum of 9 feet of clearance between the bottom of the fan and the floor in order to circulate air efficiently. If you have a low ceiling, purchase the CMA flush mount adapter to reduce the hanging height of your fan.
Suggested Downrod Lengths:
- 9 Foot Ceiling: 6" - 12"
- 10 Foot Ceiling: 12" - 18"
- 11 Foot Ceiling: 18" - 24"
- 12 Foot Ceiling: 24" - 36"
- 13 Foot Ceiling: 36" - 48"
- 14 Foot Ceiling: 48" - 60"
- 15 Foot Ceiling: 60" - 72"
- For ceiling heights greater than 15 feet, you'll need to purchase the downrod Coupler to join two downrods together.
Additional Craftmade Links
This product is listed under the following manufacturer number(s):
- Craftmade WB348TS3 Tiger Shark
*Denotes a finish or option that has been discontinued.
Craftmade Tiger Shark Ceiling FanThis Tiger Shark fan is a great addition for any aviation enthusi...
Do It Yourself: Replacing or Installing a Ceiling FanBrent Holland shows you step by step how to install or replace yo...
Craftmade Tiger Shark Ceiling Fan
This Tiger Shark fan is a great addition for any aviation enthusiast or kid who loves planes!
Do It Yourself: Replacing or Installing a Ceiling Fan
Brent Holland shows you step by step how to install or replace your existing ceiling fan