|Bulb Base||Medium (E26)|
|Bulb Type||Compact Fluorescent, Incandescent|
|Light Direction||Up Lighting|
|Number of Bulbs||2|
|Suggested Room Fit||Living Room|
|Watts Per Bulb||100|
- 2 light semi-flushmount fixture
- Satin Pewter with Painted White Marble Glass
- Aged Bronze with Painted Champagne Marble Glass
- 2 100w Max Medium Base [Bulb(s) Not Included]
Additional Thomas Lighting Links
Our SKU: SL8662
This product is listed under the following manufacturer number(s):
- Aged Bronze
- Satin Pewter
*Denotes a finish or option that has been discontinued
5 Questions from the Community
The dimensions for this fixture is 16" width and 13" body height.
What are the dimenions for this fixture?
A. The dimensions for this fixture is 16" width and 13" body height.
The canopy measures 6" in diameter.
What is the diameter of the canopy which attaches to the ceiling?
A. The canopy measures 6" in diameter.
The Thomas Lighting SL8662 height does include the finial at the bottom.
Does the height dimension of this fixture (13") include the finial on the bottom?
A. The Thomas Lighting SL8662 height does include the finial at the bottom.
The Thomas Lighting SL8662 is 16"w X 13"h. It is not offered in a smaller size.
What are the deminsions of the light? Does the light come any smaller?
A. The Thomas Lighting SL8662 is 16"w X 13"h. It is not offered in a smaller size.
The Thomas Lighting SL8662 has a height of 13" and a width of 16." This fixture uses 2 100w medium base bulbs and would be bright enough for a kitchen.
What are the demensions of this light? Does it come in any smaller sizes for a hallway? Is this light bright enough for a kitchen?
A. The Thomas Lighting SL8662 has a height of 13" and a width of 16." This fixture uses 2 100w medium base bulbs and would be bright enough for a kitchen.
Thomas Lighting Harmony Collection
Thomas products, when properly installed and under normal conditions of use, are warranted only to Thomas’ direct customers to be free from defects in material and workmanship at time of shipment. (Thomas does not warrant ballasts supplied with fluorescent units. The ballast manufacturer’s warranty, if any, must be consulted.) All warranty claims must be asserted within one year from date of receipt of the subject item; thereafter warranty claims will not be honored. Customer’s exclusive remedy for a warranty claim or otherwise shall be limited to repair or replacement of the subject product if it is shown to be defective in material or workmanship at time of shipment, and only if the claim is asserted during said one-year period. Thomas’ sole and maximum liability for a defective product shall never exceed the cost of the subject product. Except for such warranty and remedy as stated (and the express warranty of title), THOMAS DISCLAIMS ALL OTHER WARRANTIES, WHETHER EXPRESS WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICLULAR PURPOASE. IN NO EVENT SHALL THOMAS BE LIABLE TO CUSTOMER IN WARRANTY, CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, FOR ANY DAMAGES, WHETHER INCIDENTAL OR CONSEQUENTIAL, WHICH ARE ALLEGED TO BE CAUSED BY ONE OR MORE THOMAS PRODUCTS, BEYOND THE COST TO THE CUATOMER OF THE SUBJECT PRODUCT OR PRODUCTS. THEREFORE, THE CUSTOMER’S SLE AND EXCLUSIVE REMEDY AGAINST THOMAS FOR BREACH O FWARRANTY, BREACH OF CONTRACT, OR IN NEGLIGENCE OR STRICT LIABILITY OR OTHERWISE SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE SUBJECT PRODUCT AT THOMAS’ OPTION (EXCLUDING INSTALLATION AND REMOVAL CHARGES WHICH SHALL NOT BE THOMAS’ LIABILITY) OR, IF THOMAS CHOOSES, REFUND OF THE PURCHASE PRICE AND SUCH EXLUSIVE REMEDY SHALL EXPIRE ONE YEAR FROM THE SHIPMENT OF THE GOODS.
In no case does the Thomas warranty and remedy extend to anybody other than Thomas direct customers unless Thomas packs a warranty card with the product, which states otherwise. Except for such pre-packed warranty card statements, if any, customer is not authorized to extend warranties on Thomas’ behalf to anyone. Such unauthorized extensions of warranties by the customer shall remain customer’s responsibility. Customer is responsible for determining the suitability of Thomas products for customer’s use or resale, or for incorporating them into object or for applications which customer designs, assembles, constructs or manufacturers.