|Bulb Base||Bi Pin|
|Genre||Modern, Midcentury / Vintage|
|Light Direction||Down Lighting|
|Number of Bulbs||1|
|Suggested Room Fit||Kitchen, Living Room|
|Watts Per Bulb||150|
Configure your PLC Lighting 21016 SN Semi-Flush Ceiling Fixture from the Enzo Collection
Please finish configuring above
- Enzo Semi-Flush Ceiling Fixture with Matte Opal Glass
- 1 150w 120V J118mm bulb required
Additional PLC Lighting Links
- View Manufacturer Warranty
- Shop All PLC Lighting Products
- Shop All PLC Lighting Enzo Collection Products
Our SKU: PLC 21016
This product is listed under the following manufacturer number(s):
- Oil Rubbed Bronze
- Satin Nickel
*Denotes a finish or option that has been discontinued
3 Questions from the Community
The PLC Lighting PLC 21016 should be able to be dimmed using a standard electronic dimmer.
is this fixture dimmable?
A. The PLC Lighting PLC 21016 should be able to be dimmed using a standard electronic dimmer.
The PLC Lighting PLC 21016 has a width of 16" which is the diameter of the light. The length is 16" since its the same due to it being a circle.
if the width is 16" and the height is 3", what is the length?
A. The PLC Lighting PLC 21016 has a width of 16" which is the diameter of the light. The length is 16" since its the same due to it being a circle.
The PLC Lighting PLC 21016 is unfortunately not designed to withstand the humidity of bathroom use.
Is this light suitable for wet/humid areas such as bathroom?
A. The PLC Lighting PLC 21016 is unfortunately not designed to withstand the humidity of bathroom use.
PLC Lighting Enzo Collection
Other Products In The PLC Lighting Enzo Collection
PLC Lighting warrants its products will be free from defects in material and workmanship for a period of one year from the date of purchase. In the event of a defect during the warranty period, PLC will repair or replace, at its option, and at no charge to the purchaser, the product or any part of the product which is proven to the satisfaction of PLC, to have normal use during the warranty period. In the event of a defective lamp, the purchaser should return the product or parts to PLC with proof of purchase date.
This warranty is void if the product has been altered, misused, or used for purposes other than those for which it was designed.
Light Bulbs are not covered under the PLC warranty.
Plc Lighting shall in no event be responsible for any incidental or consequential dames arising from the use or improper use of the product.