NuTone HD80NT Heavy Duty Fan, 80 CFM, 2.5 Sones, Metal Grille
BCI877539
Save Big on Broan and Nutone
No Coupon Needed!
Offer Ends 6/1/2013
Compare Our Prices
Technical Specs
| Installation Sheet | |
| Specification Sheet | |
| Amperage | 0.5 |
| CFM | 80 |
| CFM (High) to Sones | 80 to 2.5 |
| Collection | Heavy Duty |
| Configuration | Exhaust Fan |
| Country Of Origin | USA |
| Duct Size | 4" Round |
| Function | Utility Fan |
| Grille Finish | White Acrylic Metal |
| Grille Length | 10.25 |
| Grille Width | 10.25 |
| Heater Included | No |
| Housing Depth | 5.75 |
| Housing Length | 8 |
| Housing Width | 8.25 |
| Humidity Sensing | No |
| HVI Certified | Yes |
| Installation Type | Ceiling, Wall |
| Light Included | No |
| Made in America | Yes |
| Motion Sensor | No |
| Product Weight | 7.5 |
| Sones | 2.5 |
| UL Listed | Yes |
| UL Rating | Wet Location |
| Voltage | 120 |
80 Cfm Heavy Duty Fan - Model Hd80Nt
- 81 Cfm, 2.5 Sones, Type Ic
- Totally Enclosed Motor Design For Continuous Operation
- High-Efficiency Centrifugal Blower Wheel
- ul listed For Use Over Bathtubs Or Showers When Connected To Gfci-Protected Branch Circuit
- Permanently Lubricated Motor. Resilient Motor Mounts Isolate Vibration
- Uses Standard 4" Round Duct
- Fits 2" X 6" Ceiling Construction
- Pre-Wired Outlet Box For Plug-In Motor Plate
- Amca licensed For Both Air And Sound
Additional NuTone Links
- View Manufacturer Warranty
- Shop All NuTone Products
- Shop All NuTone Heavy Duty Collection Products
Our SKU: HD80NT
This product is listed under the following manufacturer number(s):
- HD80NT
White
*Denotes a finish or option that has been discontinued
2 Questions from the Community
-
How does the grille remove for cleaning?
A. With the NuTone HD80NT what needs to be done to remove the grill is pull down on the grille lightly and when the metal clips holding it are exposed squeeze the clips in. This will allow for you to remove one or both sides for cleaning and to install is just the opposite of what you do.
-
Can the fan be wall mounted?
Product Reviews
NuTone Heavy Duty Collection
Other Products In The NuTone Heavy Duty Collection
-
NuTone HD80LNT
Heavy Duty Fan, Light, 80 CFM, 2.5 Sones$147.96$78.24(2) -
NuTone HD50LNT
Heavy Duty Fan, Light, 50 CFM, 1.5 Sones$72.69(4) -
NuTone HD50NT
Heavy Duty Fan, 50 CFM, 1.5 Sones, Metal Grille$125.50$66.37
Warranty Info
Broan-Nutone
One Year Limited Warranty
Broan-NuTone warrants to the original consumer purchaser of its products that such products will be free from defects in materials or workmanship for a period of one year from the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
During this one-year period, Broan-NuTone will, at its option, repair or replace, without charge, any product or part which is found to be defective under normal use and service.THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS AND TUBES. This warranty does not cover (a) normal maintenance and service or (b) any products or parts which have been subject to misuse, negligence, accident, improper maintenance or repair (other than by Broan-NuTone), faulty installation or installation contrary to recommended installation instructions.
The duration of an implied warranty is limited to the one-year period as specified for the express warranty. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
BROAN-NUTONE'S OBLIGATION TO REPAIR OR REPLACE, AT BROAN-NUTONE'S OPTION, SHALL BE THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. BROAN-NUTONE SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This warranty supersedes all prior warranties.
To qualify for warranty service, you must (a) notify Broan-NuTone at the address telephone number below, (b) give the model number and part identification and (c) describe the nature of any defect in the product or part. At the time of requesting warranty service, you must present evidence of the original purchase date.
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
