|Bulb Base||Bi Pin|
|Light Direction||Down Lighting|
|Number of Bulbs||1|
|Sconce Type||Plug In|
|Suggested Room Fit||Bedroom, Living Room|
|Watts Per Bulb||35|
- Wall Lamp
- The future is here with this set of adjustable, all metal desk, floor, and swing arm wall lamps. Imaginatively devised vented shade that is encircled by a matching polished steel ring, this look can go anywhere! A style to bring you into the 21st century!
- 35W Halogen JC Type Bulb
- (Bulb Included)
- Dimmer Switch on Base
- Mounting hardware attaches to most surfaces (no Junction box required)
- Cord and Plug Included
- Shade Dimensions: 4.5"
- Diameter of base is 4"
Additional Lite Source Links
- View Manufacturer Warranty
- Shop All Lite Source Products
- Shop All Lite Source Futura Collection Products
Our SKU: LS-1796
This product is listed under the following manufacturer number(s):
- Polished Steel
*Denotes a finish or option that has been discontinued
7 Questions from the Community
The Lite Source LS-1796 is made to be plugged into the wall and is not recommended to be hardwired.
Can this lamp be hardwired into wall?
A. The Lite Source LS-1796 is made to be plugged into the wall and is not recommended to be hardwired.
The on/off switch on the Lite Source LS-1796 can be found on the base of the light and it does adjust horizontally.
Where is the on/off switch? With the ball at the joint, is it adjustable horizontally?
A. The on/off switch on the Lite Source LS-1796 can be found on the base of the light and it does adjust horizontally.
The arms of the Lite Source LS-1796 wall sconce can move up and down as well as left to right.
Does the arm move up and down or just back and forth?
A. The arms of the Lite Source LS-1796 wall sconce can move up and down as well as left to right.
The Lite Source LS-1796 head rotates 180 degrees.
Does the 'head' rotate 360 degrees?
A. The Lite Source LS-1796 head rotates 180 degrees.
When fully extended, the Lite Source LS-1796 wall lamp is 28" long.
How far will the arm extend?
A. When fully extended, the Lite Source LS-1796 wall lamp is 28" long.
Each of the arms for the Lite Source LS-1796 is 11” long.
How long, in inches, is each arm segment?
A. Each of the arms for the Lite Source LS-1796 is 11” long.
The Lite Source LS-1796 is a hard wire unit.
what type of plug is used? is it grounded?
A. The Lite Source LS-1796 is a hard wire unit.
LIMITED WARRANTY LITE SOURCE INC. WARRANTS ITS PRODUCTS WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE. IN THE EVENT OF A DEFECT DURING THE WARRANTY PERIOD.
LITE SOURCE WILL REPAIR OR REPLACE, AT ITS OPTION, AND AT NO CHARGE TO THE PURCHASER, THE PRODUCT OR ANY PART OF THE PRODUCT WHICH IS PROVEN TO THE SATISFACTION OF LITE SOURCE, TO HAVE NORMAL USE DURING THE WARRANTY PERIOD.
IN THE EVENT OF A DEFECTIVE LAMP, THE PURCHASER SHOULD CONTACT OUR CUSTOMER SERVICE DEPARTMENT FOR AN RGA NUMBER. ANY CLAIM FOR LABOR MUST BE APPROVED BY LITE SOURCE PRIOR TO INITIATION OF SUCH.
THIS WARRANTY IS VOID IF THE PRODUCT HAS BEEN ALTERED, MISUSED, OR USED FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED.
LIGHT BULBS ARE NOT COVERED UNDER THE LITE SOURCE WARRANTY.LITE SOURCE INC. SHALL IN NO EVENT BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RISING FROM THE USE OF THE PRODUCT.
THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE