Ellington Fans KM52ABZ5LKRC Knightsbridge 5 Blade 52" Ceiling Fan - Blades, Handheld Remote Control and Light Kit Included

Have a question about the Ellington Fans KM52ABZ5LKRC?

• Can you please tell me the height and if you have to install it with the 10 inch downrod.

  A. From the bottom finial to the ceiling is 26.5". The distance from the top of the blade to the ceiling is 16.5". This fan is meant to be installed with the 10" downrod.

  77% of 22 people found this useful. Was this useful? yes (17) | no (5)

• Can you install this fan with a longer down rod, such as a 36" inch extension?

  A. The Ellington Fans DR136 down rod is 36" and fits the Ellington Fans KM52ABZ5LKRC ceiling fan.

  76% of 17 people found this useful. Was this useful? yes (13) | no (4)

• Is this fan approved for outdoor use?

  A. The Ellington Fans KM52ABZ5LKRC is approved for outdoor use in damp, but not wet locations.

  72% of 25 people found this useful. Was this useful? yes (18) | no (7)

• Will the lights dim with the remote?

  A. Yes, the Ellington Fans KM52ABZ5LKRC comes with the RC-103 hand held remote that dims the light, as well as has an instant off button and three different speed settings for the blades.

  100% of 7 people found this useful. Was this useful? yes (7) | no (0)

• need bell jar light kit for ceiling exsisting ceiling fan?

  A. The Ellington Fans KM52ABZ5LKRC light kit is designed for this fan and is not sold separately.

  100% of 2 people found this useful. Was this useful? yes (2) | no (0)

• for the winter clock wise or counter?

  A. The Ellington Fans KM52ABZ5LKRC for summer rotate the fan clockwise and for winter you will want to reverse the fan direction to counter clockwise.

  100% of 3 people found this useful. Was this useful? yes (3) | no (0)

• does this look anything like a black fan?

  A. The Ellington Fans KM52ABZ5LKRC is considered a dark brown color.

  100% of 5 people found this useful. Was this useful? yes (5) | no (0)

• Our porch with a very high ceiling only has one wire (not separate wiring for both a light and fan). Is the remote designed to interact with a sensor on the fan or the wall? Thanks. This looks like a great fan, and we'd like to buy it.

  A. The Ellington Fans KM52ABZ5LKRC has a receiver that will utilize a one wire set up, allowing you to turn the light on/off and control the different fan speeds.

  100% of 5 people found this useful. Was this useful? yes (5) | no (0)

• do have the dimensions of the bell jar fixture (width & length) ?

  A. The Ellington Fans KM52ABZ5LKRC glass is 11 inches high and 9 inches wide. Thank you for your question.

  67% of 3 people found this useful. Was this useful? yes (2) | no (1)

• Can you use this without the 10" rod? I would like to use this in an area with an 8' ceiling?

  A. The Ellington Fans KM52ABZ5LKRC is meant to be used with the 10" downrod. You may use a longer downrod, but 10" is a minimum downrod length.

  100% of 2 people found this useful. Was this useful? yes (2) | no (0)

• how tall is this fan without the 10" downrod from ceiling to tip of glass finial globe

  A. The Ellington Fans KM52ABZ5LKRC is 16.5" tall without the downrod.

  100% of 2 people found this useful. Was this useful? yes (2) | no (0)

• Is this fan suitable to be mounted on a ceiling that has deck materials? The cedar planks are approximately 1/16th of an inch apart.

  A. The Ellington Fans KM52ABZ5LKRC can be mounted on this type of ceiling as long as the material can support the 30 lbs. of weight from the fan.

  100% of 2 people found this useful. Was this useful? yes (2) | no (0)

• We like this fan and think it will perfectly in the center of an outdoor arbor we are soon constructing. My concern is you mention is good for "damp" locations but not wet locations, I assume this fan in our intended location will receive some indirect rain during the winter months (northern California climate), will this work or should we focus on another Ellington Outdoor fan?

  A. The Ellington Fans KM52ABZ5LKRC is UL listed for Damp locations, like an outdoor patio, but is not recommend to be outside in a place where it will be exposed enough the to get wet by the rain.

  67% of 3 people found this useful. Was this useful? yes (2) | no (1)

• Can I purchase this fan style without the light kit?

  A. The Ellington Fan only comes withe the ones with light kits. I did find something similar. Model number ME52OB.

  50% of 2 people found this useful. Was this useful? yes (1) | no (1)

• What are the blades made of?

  A. The Ellington Fans KM52ABZ5LKRC comes with fan blades that are made out of ABS.

  33% of 3 people found this useful. Was this useful? yes (1) | no (2)

• I do not want to use a remote. I am replacing a fan that has a light and fan control separtely on the wall. Can this be installed this way?

  A. The Ellington Fans KM52ABZ5LKRC can be hardwired to your home and controlled via wall control.

  67% of 3 people found this useful. Was this useful? yes (2) | no (1)

• The porch I'd like to install this fan has an approx 30 degree slope. Can this fan be mounted on a ceiling with a slope?

  A. The Ellington Fans KM52ABZ5LKRC can be mounted on a slope.

  50% of 2 people found this useful. Was this useful? yes (1) | no (1)

• Can I get an 18" downrod with this fan? If so, what is the part number?

  A. The Ellington Fans KM52ABZ5LKRC is compatible with all Ellington down rods. The model number for the Ellington Fans 18" down rod is DR118.

  50% of 2 people found this useful. Was this useful? yes (1) | no (1)